The basic features of Suspension Clamp: 1. Uniform stress distribution, no stress concentration point, can enhance the rigidity of the cable installation point, and have good protection performance for the cable. 2. The suspension clamp has good dynamic stress bearing capacity, and the grip strength of the clamp meets the specified unbalanced load, and the holding force can reach 10%-20% of the rated tensile strength (RTS) of the opti...
The six advantages of Wedge Tension Clamp: 1. Effectively eliminate short-circuit accidents caused by small animals such as birds and beasts or foreign objects; 2. Prevent electrical accidents caused by condensation, smudging and icicles; 3. Prevent acid rain, salt spray and harmful chemical gases from corroding the transformer's incoming and outgoing lines;
The Piercing Clamp is mainly composed of reinforced shell, puncture blade, gasket, waterproof silicone grease, high-strength bolt, torque nut and cable end cap. When the cable needs to be branched or connected, insert the cable branch terminal into the waterproof terminal cap.
When the Composite Pin Insulator is struck by lightning, the silicone rubber insulated shed does not rupture and has obvious burning marks that are easily found by line patrol personnel. After a comprehensive electrical test of the Composite Pin Insulator, the needle composite insulator was immersed in water for several hours, and the dry flash, wet flash and withstand voltage tests were all in compliance.
The Composite Insulators play an important role in the use of electrical equipment, which can effectively ensure the normal operation of the line. Therefore, the composite insulators installed in overhead lines must have good quality assurance to ensure that they can withstand relatively large pressures and loads.
In wet weather conditions, the dirty China Composite Insulator is prone to flashover discharge, so it must be cleaned to restore the original insulation level. The general area is cleaned once a year, and the dirty area is cleaned twice a year (before the fog season).
Metal Anchor Clamp
Plastic Anchor Clamp
10KV Insulation Piercing Conne...
6KV1min Under Water Test Proof...
Insulation Piercing Connector
Insulation piercing connector ...
The basic features of Suspension Clamp: 1. Uniform stress distribution, no stress concentration point, can enhance the rigidity of the cable installation point, and have good prote...
Copyright © Hebei Sali Electric Equipment Manufacturing Co., Ltd. All Rights Reserved
Technical Support:
Online Service
