The Most Common Way To Clean Insulators

As a Tension Clamp Manufacturer, we have summarized several common methods of insulator cleaning.

1. Power outage

The power-off cleaning is to wipe the technician with a rag after the power failure of the route. If it is not cleaned, it can be wiped with a damp cloth, or it can be cleaned with detergent. If it is not cleaned, replace the insulator or replace the composite insulator.

2. Constant power cleaning

It is usually done by using an insulating rod with a brush or cotton yarn to wipe the insulator on the working route. The characteristics of the electrical equipment used and the reasonable length and the distance between the person and the charged part shall be in accordance with the requirements of the relative voltage level, and must be monitored by the responsible person when using.

3. Charged water cleaning

There are two ways of big water and small water. The cleaning water, the reasonable length of the operating rod, and the distance between the person and the energizing part must comply with the technical specifications.

Our company offers Composite Pin Insulator. If you are interested in our products, please contact us.